Gmc 2008 Canyon User Manual download pdf (Page 311)

100

101

Front Turn Signal, Parking and

Daytime Running Lamps (DRL)

To replace one of these bulbs:

1. Open the hood. See Hood Release on page 5-11

for more information.

2. Reach in to access either one of the bulb sockets

in the engine compartment.

3. Turn the bulb socket counterclockwise and remove

it from the lamp assembly.

4. Holding the socket, pull the old bulb to release it

from the bulb socket.

5. Push the new bulb into the socket until it clicks.

6. Insert the bulb socket into the lamp assembly and

turn it clockwise to secure.

7. Close the hood.

Center High-Mounted Stoplamp

(CHMSL)

To replace the CHMSL bulb:

1. Remove the two screws and lift off the lamp

assembly from the vehicle.

2. Turn the bulb socket counterclockwise and remove

it from the lamp assembly.

3. Holding the socket, pull the bulb to release it from

the socket.

4. Push the new bulb into the socket until it clicks.

5. Insert the bulb socket into the lamp assembly and

turn it clockwise to secure.

6. Reinstall the lamp assembly and tighten the screws.

5-51

1 2 ... 306 307 308 309 310 311 312 313 314 315 316 ... 427 428

Comments to this Manuals

No comments

Gmc 2008 Canyon User Manual Page 311

Comments to this Manuals

Related products and manuals for Cars Gmc 2008 Canyon