Gmc 2008 Canyon User Manual download pdf (Page 141)

Flash-to-Pass

This feature lets you use the high-beam headlamps to

signal a driver in front of you that you want to pass.

It works even if the headlamps are in the automatic

position.

To use it, pull the turn signal lever toward you, then

release it.

If your headlamps are in the automatic position or on

low beam, your high-beam headlamps will turn on. They

will stay on as long as you hold the lever toward you.

The high-beam indicator on the instrument panel cluster

will come on. Release the lever to return to normal

operation.

Windshield Wipers

You control the windshield wipers by turning the band

with the wiper symbol on it.

The windshield wipers work in all ignition positions,

except off. This includes the Retained Access Power

mode. See Retained Accessory Power (RAP) on

page 2-21.

8(Mist): For a single wiping cycle, turn the band to

mist. Hold it there until the wipers start. Then let go.

The wipers will stop after one wipe. If you want

more wipes, hold the band on mist longer.

N(Delay): You can set the wiper speed for a long or

short delay between wipes. This can be very useful in

light rain or snow. Turn the band to choose the delay

time. The closer to the top of the lever, the shorter the

delay.

6 (Low Speed): For steady wiping at low speed,

turn the band away from you to the ﬁrst solid position

past the delay settings.

1 (High Speed): For high-speed wiping, turn the

band to the second solid position past the delay settings.

9(Off): To stop the wipers, move the band to off.

Be sure to clear ice and snow from the wiper blades

before using them. If they’re frozen to the windshield,

carefully loosen or thaw them. If your blades do become

worn or damaged, get new blades or blade inserts.

3-9

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 427 428

No comments

Gmc 2008 Canyon User Manual Page 141