Gmc 2007 Sierra User Manual download pdf (Page 526)

Notice: If the jumper cables are connected or

removed in the wrong order, electrical shorting

may occur and damage the vehicle. The repairs

would not be covered by your warranty. Always

connect and remove the jumper cables in the

correct order, making sure that the cables do

not touch each other or other metal.

A. Heavy, Unpainted Metal Engine Part or

Remote Negative (−) Terminal

B. Good Battery or Remote Positive (+) and

Remote Negative (−) Terminals

C. Dead Battery or Remote Positive (+) Terminal

To disconnect the jumper cables from both

vehicles do the following:

1. Disconnect the black negative (−) cable from

the vehicle that had the bad battery.

2. Disconnect the black negative (−) cable from

the vehicle with the good battery.

3. Disconnect the red positive (+) cable from the

vehicle with the good battery.

4. Disconnect the red positive (+) cable from the

other vehicle.

5. Return the remote positive (+) terminal cover,

if your vehicle has one, to its original position.

Jumper Cable Removal

526

1 2 ... 521 522 523 524 525 526 527 528 529 530 531 ... 673 674

Comments to this Manuals

No comments