Gmc 2007 Sierra User Manual download pdf (Page 525)

8. Do not let the other end touch metal. Connect

it to the positive (+) terminal of the good

battery. Use a remote positive (+) terminal if

the vehicle has one.

9. Now connect the black negative (−) cable to

the negative (−) terminal of the good battery.

Use a remote negative (−) terminal if the

vehicle has one. The vehicle’s remote

negative (–) terminal is marked GND.

10. Do not let the other end touch anything until the

next step. The other end of the negative (−)

cable does not go to the dead battery. It goes

to a heavy unpainted metal engine part of the

vehicle with the dead battery, or to a remote

negative (–) terminal if the vehicle has one.

11. Connect the

other end of the

negative (−) cable

to the remote

negative (−) terminal,

marked GND, on the

vehicle with the dead

battery.

See Engine Compartment Overview on

page 480 for the location of your vehicle’s

remote negative (−) terminal.

12. Now start the vehicle with the good battery

and run the engine for a while.

13. Try to start the vehicle that had the dead

battery. If it will not start after a few tries, it

probably needs service.

V8 engine shown, other

engines similar

525

1 2 ... 520 521 522 523 524 525 526 527 528 529 530 ... 673 674

Comments to this Manuals

No comments