Gmc 2007 Acadia User Manual download pdf (Page 176)

100

101

Headlamp High/Low-Beam Changer

To change the headlamps from low beam to

high beam, push the turn signal/multifunction

lever toward the front of the vehicle.

This light on the

instrument panel

cluster comes on if

the high beam lamps

are turned on while

the ignition is on.

To change the headlamps from high beam to

low beam, pull the turn signal lever toward the

rear of the vehicle.

Flash-to-Pass

With the turn signal lever in the low-beam position,

pull the lever toward you momentarily to switch

to high-beam (to signal that you are going to pass).

If the headlamps are on, they will return to

low-beam when the lever is released.

This feature operates even when the headlamps

are off.

Windshield Wipers

Be sure to clear ice and snow from the wiper

blades before using them. If they are frozen to the

windshield, gently loosen or thaw them. Damaged

wiper blades may not clear the windshield well,

making it harder to see and drive safely. If the

blades do become damaged, install new blades or

blade inserts. For more information, see Windshield

Wiper Blade Replacement on page 434.

Heavy snow or ice can overload the wiper motor. A

circuit breaker will stop the motor until it cools down.

Clear away snow or ice to prevent an overload.

176

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 553 554

Comments to this Manuals

No comments

Gmc 2007 Acadia User Manual Page 176

Comments to this Manuals

Related products and manuals for Cars Gmc 2007 Acadia