Gmc 2000 Sierra User Manual download pdf (Page 83)

100

101

yellowblue

2-5

If your vehicle has this

power door lock switch,

press the bottom of the

switch on either front door

to lock all the doors at once.

Press the top of the switch to unlock all the doors

at once.

The power door locks will operate at any time without

the ignition being on.

The power door locks will also automatically lock when

the vehicle reaches 15 mph (24 km/h). To unlock the

doors, refer to the instructions listed previously. The

automatic locking feature can be disabled, if you prefer.

See your dealer for assistance.

Operating the power locks may interact with the

theft-deterrent system (if equipped). See “Content

Theft

-Deterrent” in the Index.

Programmable Automatic Door Locks

(If Equipped)

Your vehicle may be equipped with an auto lock/unlock

feature which enables you to program your power door

locks. The following instructions detail how to program

your door locks.

To enter the program mode you need to:

1. Pull back on the the turn signal/multifunction lever

all the way toward you and hold it while you

perform the next step.

2. Beginning with the ignition in OFF, turn your key to

ON. Return it to OFF and turn to ON again. Then

return it to OFF. Once you do this, you will hear the

lock switch lock and unlock.

3. You are now ready to program the automatic door

locks. You will have ten seconds to program once

you release the turn signal/multifunction lever.

The following is a list of the available

programming options:

Press the lock side of the lock switch on the driver’s

side door panel once to turn on the automatic door

lock feature. All doors lock. No doors will unlock.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 420 421

Comments to this Manuals

No comments

Gmc 2000 Sierra User Manual Page 83

Comments to this Manuals

Related products and manuals for Cars Gmc 2000 Sierra